Installation Instructions:
1. Place three set screws in legs of base plate but do not thread into openings. 2. Place pump legs into three openings of base plate legs. 3. Making sure pump is level and remains approximately 4” off bottom of basin, tighten three set screws against sides of pump legs. 4. Assemble all necessary discharge piping, check valves, etc. (not furnished with stand) to the pump. 5. Attach lifting cable, chain or rope to pump lifting handle and lower pump into basin slowly. 6. DO NOT DROP !
Specifications: Base Plate: 11.68"x7.62"x.25" Thk. Steel Approx. Weight: 9 Lbs. Part Number: BN082306
